20mm x 4mm with Countersink Hole M5mm N35 Strong Round Countersunk Neodymium Disc Magnets DIY (10 Balenie)
$12.79
| ID modelu | DCS-20-04-05-N |
| Materiál | NdFeB, Stupeň N35 |
| Tvar | Countersunk Disc |
| Rozmery | 20mm x 4mm thick with countersunk M5mm |
| Tolerancia | +/-0.1mm |
| Náter | Poniklované (Ni-Cu-Ni) |
| Magnetizácia | Axiálny (Palice na plochých koncoch) |
| Sila ťahu | približne. 2.05 kg |
| Povrchové pole | 2850 Gauss |
| Max. pracovná teplota | 80°C/176°F |
| Hmotnosť(1 Piece) | 8.95 g |
These rings are sold by the pair. One will have the north pole on the side with the large end of the hole and one will have the south pole on that side, so they will attract each other when they are screwed in.
Tieto magnety sa predávajú v baleniach 10, Objednajte si množstvo 1 a získať 10 magnety .Objednajte si množstvo 2 a získať 20 magnety .Objednajte si množstvo 3 a získaj 30...
10ks 20 mm x 4 mm Thick with CounterSunk Hole 5 mm N35 Strong Countersunk Ring Rare Earth Neodymium Magnets Nickel Plated Disc Countersunk Magnets Sale
- Rozmery: 10mmm on. x 3mm thick with countersunk hole 3mm
- Magnetická tvár: 10priemer mm
- Typ magnetov: Trvalé
- Materiál: Spekaný NdFeB, Neodym
- stupňa: N35
- Pokovovanie / Náter: Ni-Cu-Ni (Nickel-Plated)
- Smer magnetizácie: Axiálny(Palice na plochých koncoch)
- Hmotnosť: 1.63 g/kus
- Hole type: single countersunk hole
- Max prevádzková teplota: 176°F (80°C)
- Množstvo: 20x countersunk magnets
- Sila ťahu:približne. 0.75 kg
Countersunk neodymium disc magnets can be fastened with a countersunk head screw. They are only 4 mm thick and therefore very discreet for hanging up signs, tools, atď. Especially suitable for cabinetmaking, kitchen installations, booth and store construction, signage technology, atď.
strong neodymium countersunk disc magnets are best for securely attaching magnets on to both magnetic and non-magnetic surfaces including wood, plastic, brass, copper, rubber and aluminum.
The countersunk hole enables a standard screw to be flush mounted into the magnet to securely fasten it into doors, cabinets, chests, toolboxes, displays, signs, panels, art frames and other hidden closure or attachment applications. Closures can involve a pair of magnets with the countersunk holes on opposing poles or one magnet and a steel disc.
Strong countersunk ring magnets sized specifically for flat-head screws. The north pole is on the side of the magnet with the large hole, where the head of the screw would be.
These countersunk rings can be used for a wide range of applications including door closures and tool hangers.
Please note: Neodymium magnets are brittle and can break under excessive application of force. Not all holding surfaces are level, which is why magnets need a little slack. This allows them to optimally align with the ferromagnetic object and extend the highest adhesive force. That is why we recommend fastening these magnets by hand.
Neodymové magnety sú ideálne na použitie v suchých vnútorných priestoroch.
Buďte prvý, kto napíše recenziu “20mm x 4mm with Countersink Hole M5mm N35 Strong Round Countersunk Neodymium Disc Magnets DIY (10 Balenie)”
Musíte byť prihlásený uverejniť recenziu.
Súvisiace produkty
Recenzie
Zatiaľ tu nie sú žiadne recenzie.